Mechanical Testing
1. Products
Structural Materials
|
Ferro Alloy
|
Pipe
|
Pipe
|
Bronze
|
Brass
|
Parameters:
|
|
|
Parameters :
- Tensile Strength
- Tensile test with extensometer
- Tensile test on Torsteel Bars
- Bend test on plates
- Bend test on pipes
- Bend Test on Torsteel
- Re-Bend test on Torsteel
- Nick Break Test
- Flattening/Flaring/Flanging test
- Hardness test (Rockwell/Brinell/Vickers)
- Compression test on Springs/Load test
- Proof Load test on Nuts
- Impact test
- Charpy Impact
- Izod Impact
- V notch and U notch
- Sectional Weight / Unit Weight
- Weldability test
- Wedge load test on bolts
- Reverse Bend test
- Testing on Clamps/Chains and Assemblies
- Fracture test for butt weld
- Minimum Leak Path
- Shear Strength
- Crushing test
- Galvanization
- Adhesion
- Uniformity
- Wedge Load
- Yield Stress
- Elongation
- Reduction area
- Proof Load
- Load tests
- Pull off load
- Push off load
- Shear strength
- Bend
- Rebend
- Hardness, HRC, HV, HBW, HRA, HRB
- Weight per Meter
- Impact Strength
- Non Destructive test
- Failure Analysis
Third party witness is provided in our laboratory.
Test Method :
Indian Standards Specifications (IS) :
IS:1608 (2005) / IS 1786 (2008) / IS 1500 (2005) / IS:1586: 2000 (RA2006)/
IS:1599:1985 (RA2006) / IS:2328:2005 / IS:1757 :1988(RA2003)
IS: 1499 :1977(RA2003 ) / IS:1367-Pt-3(2002) / IS:1367 Pt6:1994(RA2005)
IS:1501 (2002) /
Third party witness is provided in our laboratory.
Test Method :
International Standards (ISO)
ISO 6892(1998) / ISO 6506-1(1999) / ISO 6507-1(1998)
American Standards (ASTM)
ASTM E 8M (2008) / ASTM E 18 (2006) / ASTM E190(92):2003 / ASTM E290(97):2004
ASTM A265 (2003) / ASTM A264 (2003) / ASTM A263 (2003) / ASTM A370 (2009) /
ASTM E 92-82 (RA2003)